Top 20 Best Selling Motor Drives Telescope Accessories (2019)




Motor Drive for Celestron AstroMaster or PowerSeeker EQ series telescopes. Allow for automatic tracking of objects on your AstroMaster EQ Mount. No more turning knobs, let the motor drive track objects for you! Without a motor drive the AstroMaster te ... more info

This dual axis motor drive, with drive corrector capabilities, is designed for Celestron's CG-4 mounts for tracking in RA and allows movement in DEC. It precisely controls the telescope's tracking speed during long, timed exposures of celestial objects, p ... more info


Motor Features: Rated Voltage: DC5V 4-phase Step angle: 5.625 x 1/64 DC Resistance: 200Ω±7% (25C) Insulation Resistance: >10MΩ (500V) Dielectric Strength: 600V AC / 1mA / 1s Insulation Grade: A No-load Pull in Frequency: >600Hz No-load Pull out Frequency ... more info


Pop one of these precision mini-motors on a compatible Orion or Celestron equatorial mount and track celestial objects automatically. It'll make observing easier and more fun! Drive provides regulated sidereal-rate tracking in right ascension. Hand contro ... more info



Compatible with all German Equatorial (EQ) AstroMaster and PowerSeeker telescopes. If the mount is not polar aligned, the drive will not appear to work correctly. This motor drive attaches to the gear shaft of the mount using a coupler with a set screw. ... more info

Pop one of these precision mini-motors on a compatible Orion or Celestron equatorial mount and track celestial objects automatically. It'll make observing easier and more fun! Drive provides regulated sidereal-rate tracking in right ascension. Hand contro ... more info



Description The item is a set of 10pcs professional and practical L293D step motor driver chips, which are mainly made of durable hard alloy and plastic materials, and features 16-pin design and channel channel capability up to 600mAh output current. Wit ... more info

This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control. Raspberry Pi and motors are not included. Since the Raspberry Pi does not have a lot of PWM pins, this HAT uses a fully- ... more info



TrueTrack precision DC drives provide accurate, regulated tracking for SkyView Pro mounted telescopes. Dual-axis control is ideal for high-power viewing and astrophotography. Hand controller allows sidereal tracking in right ascension and electronic contr ... more info




# Oil-less compressor with twin cylinders and twin condensers for greatly reduced liquid and vapor recovery time, up to 2?4 times faster # 1/2 HP high-torque ball bearing motor with 550 PSI cutoff switch # Heavy-duty crankcase isolated from refrigerant pr ... more info





The new iOptron Z design mount puts the weight of the payload at the center of gravity allowing for greater natural stability. Given its payload capacity, this means the Z designed mount is unusually light-a nice benefit when setting up at a remote site. ... more info

Fire four solenoids, spin two DC motors or step one bi-polar or uni-polar stepper with 1.2A per channel (3A peak) using the TB6612. These are perhaps better known as the drivers in the assembled Adafruit Motorshield or Motor HAT. We really like these dual ... more info


Pop one of these precision mini-motors on a compatible Orion or Celestron equatorial mount and track celestial objects automatically. It'll make observing easier and more fun! Drive provides regulated sidereal-rate tracking in right ascension. Hand contro ... more info


# Oil-less compressor with twin cylinders and twin condensers for greatly reduced liquid and vapor recovery time, up to 2?4 times faster # 1/2 HP high-torque ball bearing motor with 550 PSI cutoff switch # Heavy-duty crankcase isolated from refrigerant pr ... more info



Product description: 1,Standard double panel design,fine workmanship, board size:38mm X 30mm 2, Use ULN2003 drive chip,500mA 3,In stepping motor port,four channels highlight SMD green LED diode indicates working status 4, In DC motor port,one channel ... more info




Born out of the popular iOptron Cube and iEQ mounts, the SmartEQ Pro mount is the ultimate Grab N’ Go German equatorial Goto mount fitting into almost everyone’s budget. It is ideal for visual observation and wide field astrophotography. The compact desig ... more info

Specifications: Motor diameter: 15 MM Motor height: 10 MM The output shaft diameter: 1.5 MM The output shaft length: 6 MM Motor: two phase four wire The step angle: 18 degrees Weight: 9 G ... more info



Low Voltage Input DC SCR Dr.-Chassis-Independently Adjustable Acc/Dec Dual Voltage 120/240 VAC, 50/60Hz. Adjustable horsepower settings. Barrier terminal strip. Full wave bridge supply. 1% speed regulation, 1/2% with tach feedback. Adjustable Minimum spee ... more info


Recommended operating voltage range DC 1.5V to 6V, metal body, 6 layers eccentric weight. Great replacement micro vibration motor for your broken one. ... more info


Fract. HP DC Dr.-Chassis- 4-20mA Auto/Man Sig Foll (125 ser) Dual Voltage 120/240 VAC, 50/60Hz. Adjustable horsepower settings. Barrier terminal strip. Full wave bridge supply. 1% speed regulation, 1/2% with tach feedback. Adjustable Minimum speed. Adjust ... more info

specification Working mode:Drived by H bridge(double lines) Logical voltage:5V Driving voltage:5V ¡ª 35V Logical current:0mA-36mA Storage temperature:£¨ -20 ¡æ£©¡ª£¨ +135 ¡æ£© Maximum power:25W Driving current:2A (MAX single bridge) package: 1 x Double H ... more info




Feature with long shaft, high speed, strong magnetism, 545 DC DIY motor, two ball bearing. Operates on DC 6V-12V (12V Nominal). Full load (maximum efficiency at DC12V) perfermance characteristics: Speed: 26000RPM Voltage: DC 12V Current: 1.9A Power Outp ... more info



Motor Features: Rated Voltage: DC5V 4-phase Step angle: 5.625 x 1/64 DC Resistance: 200Ω±7% (25C) Insulation Resistance: >10MΩ (500V) Dielectric Strength: 600V AC / 1mA / 1s Insulation Grade: A No-load Pull in Frequency: >600Hz No-load Pull out Fr ... more info


specification Working mode:Drived by H bridge(double lines) Logical voltage:5V Driving voltage:5V ¡ª 35V Logical current:0mA-36mA Storage temperature:£¨ -20 ¡æ£©¡ª£¨ +135 ¡æ£© Maximum power:25W Driving current:2A (MAX single bridge) package: 1 x Double H ... more info



Specifications: Motor diameter: 4 MM Motor length: 12 MM (not including the bearing sleeve) Output shaft: 0.7 MM The output shaft length: 4.5 MM Voltage: 3.7 V Current: 0.05 A Speed: 63000 RPM (3V is 51000, the current is 0.03A) Length: about 180 MM ... more info

DC coreless vibration motor, cylinder shape, magnetic, 2 wire connector, used for model helicopter and other RC aircraft toys. High power high starting torque to guarantee its working efficiency, low cost long life. ... more info



This 5-wire 4-phase step motor can be driven by the ULN2003 chip, which comes with this step motor. With wire and connector, this step motor can be used with development board directly. Description: This is a high quality step motor Comes with cable and ... more info

Uses one 9 Volt battery and attaches to the R.A. worm shaft with ease! For use with the Tasco 40-060675, 40-114675, 46-060675, 46-114375, 46-114500 and more! ... more info





Specifications Stepper motor diameter: 6 MM Height: 11 MM (not including the bearing sleeve) Output shaft: 1 MM The output shaft length: 3.5 MM (above the belt gear) Work rated voltage: 3-5V dc The new Japanese Nidec micro stepping motor, widely to ... more info


2 HP Dr.-Pow. Int. Rly Chassis- 4-20mA Sig Foll Dual 120/240 VAC, 50/60Hz via slide selector switch. Adjustable horsepower settings. Barrier terminal strip. Packaged bridge supply (fullwave) 1% speed regulation; 1/2% with tach feedback. Adjustable Minimum ... more info

Resistance of DC Coil =45 ohm , voltage: 3-5V dc Stepper motor diameter: 6 MM Height: 6 MM diameter Output shaft: 1.5 MM (with a small Sliding table) The output shaft length: 19 MM Package Including: 10pcs motor ... more info




amazon goldbox discount deals