Top 20 Best Selling Fume Hoods Gas Handling & Extraction (2019)




Features a one-piece polyethylene shell with a clear acrylic panel that slides on inside tracks. The panel can be set in an open, closed or intermediate position. When in the closed position, the door will remain open slightly to facilitate continuous air ... more info

The Bel-Art 500000003 Scienceware fume hood has a large (30 x 20 x 42 inches [H x W x D]) body, with a molded, one-piece, polyethylene hood that slides up and down on inside tracks, and has a choice of open, closed, or intermediate door positions. A fu ... more info


Clear fume hood with three position sash offers 360 degree visibility. Overall dimensions: 111.4W x 61 OD x 66.3cm H (43 7/8 x 24 x 26 1/2); Interior dimensions: 106.7W x 50.8D x 66.3cm H. ... more info


Cryogenic Protective Gloves - Large, to the Mid-arm, Water-Proof ... more info



ISO Class 4 air cleanliness as per ISO 14644.1 (equivalent to Class 10 as per US Federal Standard 209E) High-quality pre-filter and main HEPA filter Nominal downflow velocity of 0.3 m/sec (60 fpm) Ergonomically sloped front ... more info





Fume Adsorbers are geared for light duty histology cover slipping and staining areas. Activated carbon media adsorb organic odors and noxious vapors released by solvents like xylene and toluene while clean air is recirculated into the laboratory. These en ... more info



Cryogenic Protective Gloves - Large, to the Mid-arm, Water-Resistant ... more info


These polypropylene exhaust hoods are intended to rest on the rear edge of a tank and draw a stream of air across the top of the tank, away from the operator. An exhaust system is required. Formula for calculating required airflow for hood: x 150 = CFM. S ... more info



Material is best quality, cold rolled, mild annealed, sheet steel, free from buckle, loose scale or other surface imperfections. All sheet steel parts are to be thoroughly cleaned before finish is applied. Finish shall be baked on at a temperature of not ... more info




Clear fume hood with three position sash offers 360 degree visibility. Overall dimensions: 65.7W x 61 OD x 67.3cm H (25 7/8 x 24 x 26 1/2); Interior dimensions: 61 W x 50.8D x 66.3cm H. ... more info

The door opens to three positions, ranging from 25cm (10) to 53cm (21). The connecting stack has a152mm (6) outside diameter, with a damper. See chart below. Non-reactive to sparking. The sturdy construction of the hood incorporates (1/4) thick polypropyl ... more info


White Swan Unisex Polyester/Cotton Lab Coats, White Swan-Meta 6116-11-XXL ... more info


This safety observation hood is made from polyethylene and has two clear, polycarbonate panels--one on each side for viewing by several students at one time. One panel is movable and has three adjustable positions. Experiments can be more safely and thoro ... more info



The ComforTech Assurance hood is made of a low particulate material manufactured using the latest techniques to help protect your manufacturing environment. The hood gives workers full range of motion and vision while acting as a barrier to particles, bio ... more info

amazon goldbox discount deals